Sometimes the stitching on our garments comes undone, leaving a hole. Seams that endure extra pressure can break, or we might accidentally catch a thread and unravel the stitching. Without a sewing machine, it might seem impossible to mend—but you can make a perfectly reasonable repair by hand.
What you need:
- Needle
- Thread (matching the fabric colour)
- Scissors
- Pins (optional)
- Prepare the seam:
- Turn the garment inside out.
- Trim any loose threads.
- If the hole is large pin the fabric edges together if needed to hold them in place. You could use spare needles or safety pins if you don’t have any pins.
- Thread the needle:
- Cut a piece of thread about 40-50cm long.
- Thread the needle.
- Start sewing backstitch:
- Tie a knot in the end of your thread or stitch a few stitches into the seam near where you want to make the repair.
- Bring the needle up from the back about 2-3mm away from where you have secured the thread.
- Push the needle back down a 2-3mm behind where the needle came up.
- Bring the needle up again a stitch length ahead of the last stitch and repeat.
- Finish the seam:
- Once you reach the end of the ripped area, make a few small stitches to secure.
- Press (optional):
- Press the seam with an iron to flatten and set the stitches.
